Provide Your Plants With The Best Sun Light When Growing Indoors With The LUMii Solar Pro Lamp Kit

• Full Fixture Light – featuring ballast, reflector and lamp within one single unit
• For use as a standalone light or as an additional light to other lights in your grow room
• Provides extremely high levels of PAR
• Fitted with short circuit protection

The LUMii Solar Pro Lamp Kit is a complete full fixture CDM lighting unit which when used alongside an HPS bulb will increase plant health and growth, within your indoor grow room.

What is the LUMii Solar Pro Lamp Kit used For?

The LUMii Solar Pro Lamp Kit is a Ceramic Metal Halide lighting unit which is perfect for giving your plants a healthy boost. This kit mimics natural sunlight, providing an almost natural environment for plant growth. This is a particularly high-end grow light, but at a cost-effective price, giving both professionals and non-professionals the opportunity to take full advantage of CDM Lighting.

Furthermore, this ceramic discharge metal halide lamp is made with a ceramic arc tube instead of typical composites. This helps to enable the lamp to operate at high temperatures and reflects high levels of light down your plants. Therefore spreading light far more evenly using the reflector.

CDM lamps create a far more advanced plant usable light. Plus they provide a far lower heat output than a typical HPS lighting system. This particular kit comes with the LUMii Solar 315w CDM Pro lamp which produces light predominantly in the orange and red part of the spectrum. This light is perfect for flowering and increasing oil production and has a colour temperature of 3000k.

Where can you use the LUMii Solar Pro Lamp Kit?

This Lamp Kit is designed to hang within the centre of your grow room. They are easy to set up, simply hang them using jack chain or rope ratchets. This is a highly efficient kit which can either be a stand-alone light or as an additional light to other lights within your grow room.

How to use the LUMii Solar Pro Lamp Kit                                      

To use this Lamp Kit simply start by screwing the lamp into the E40 fixture on the reflector. Remember that when handling lamps it is important that you do not touch the glass with your fingers as it can cause damage. Instead, use a cloth to connect it. Make sure you screw the lamp in tightly as incorrect fixtures can cause your lamp to arc. Next, connect the input lead of the reflector to the output lead of the ballast, ensuring that the wattage of your ballast and lamp match. Finally, connect the mains plug into your electrical switch and turn on the kit.

LUMii Solar Pro Lamp Specifications

• 1 x LUMii Solar Pro Lamp Kit
• Dimensions: 42cm x 27cm x 15cm
• Weight: 7kg