Prima Klima fi-150mm, 760 m³/h, radial fan, speed control, temp sensor.

-connection: fi-150mm
-capacityadjustable 0-760m3/h
-floating speed and temp control in the box
-temperature control range: 20-30 °C
-power supply 230 V, current consumption 65W
-possibility to work in any position
POWERFUL: high static pressure
-ready for installation, wired, supplied with wall bracket
-installed sensational controller that automatically maintains the set temperature


Fan equipped with a controller that maintains the set temperature in the box:

-ventilates
-adjusts the speed to the measured temperature
-possesses:
.temperature threshold regulation
.regulation of revolutions / speed of the radial fan
.cable with sensor for temperature measurement 4m
It works on the principle of changing the performance of the fan when the temperature exceeds the designated point by 2st. Celsius.
If the temperature is too high, the controller will accelerate the speed of the fan blades, when the temperature stabilizes at the level we want, the fan will return to the previously set speed.
The sensor included in the kit has a cable length of 4m, if it was insufficient it can be extended to 50m, with special attention when removing the old, installing the new cable as well as the first start-up because incorrect installation can damage the components of the device.
Remember not to place the sensor too close to heat or light sources, as this may affect the measurement errors and incorrect set parameters!