AutoPot EASY2GROW 80 pot System with 750L tank (8.5L pots)

Easy2grow system differs from the system 1Pot, base, which is divided into two 8,5l pots with a water dispensing system AQUAvalve. So that a lower cost can grow more plants that do not require large pots.

The set includes:

- 1 x 750L tank lid
- 1 x 16mm quick filter
- 30 x double stand
- 80 x pot 8,5l
- 4 x 16mm simple tap
- 80 x mat copper controlling excessive exaggeration roots
- 80 x mat material to prevent the escape of the substrate from the pot
- 1 x 20m hose 6mm
- 1 x 20m hose 16mm
- 3 x 16mm connector T
- 20 x 16mm / 6mm type connector X
- 1 x Manual

The AutoPot is a universal irrigation system suitable for the cultivation of most crops and ornamentals. It can be used in greenhouses, in the garden or in the house, regardless of experience level. Activities include both typical hydroponic substrates, having the advantages of soilless cultivation as well as in the ground coconut or rockwool. Operating system automatically saves a lot of time to go for a long weekend and be sure healthy plants, at the same time a successful harvest, without the risk of dehydration.

Why is AUTOPOT?

- End of daily watering,
- The system can be left unattended, until exhaustion of medium from the tank (depending on the size and type of the system and uprawionych plants for two weeks)
- No power, pumps, timers time or special connections, sewerage, gravitational pressure is the force of this system,
- Saving water and fertilizer, the system is closed, all the water use plants,
- No need to constantly monitor the pH / EC
- Easy, intuitive operation,
- Low maintenance costs,
- There is no limit as to the size of the system,
- The possibility of free spacing pots
- No need to rinse each plant at the end of flowering, simply pour into the tank with clean water,
- The AutPot makes the crop becomes simple, automatic ideal for busy hobbyists as well as for people practicing commercially.

AQUAvalve water dispensing system, is responsible for providing water, blocking the flow, so that the roots can use bloated to stand water, dry up, also oxygenate, then stand again is filled to a level 20 mm.

Everything that should be remembered is refilling the main tank suitable growth medium for plants.

The manufacturer recommends the use of hoses supplying medium with a diameter of 6mm systems 1-11 pots. Over 12 pots, it is advisable to use tubing with a thickness of 16mm. The more under a given set of pots, the main tank should be larger.

The tank should be placed min more than 15cm pots, to gravitational pressure effectively nawadniało system.

Recommended ground to ground / coconut / wool in a 50% / 50% perlite / keramzyt.

Capacity pots 8,5l

Dimensions: 24,5cm x 24,5cm x 20cm h

The dimensions of the base system AQUAvalve: 27,5cm x 57,5cm