Autopot Easy2Grow 2x 8.5L Irrigation System

The Easy2grow system, differs from the 1Pot system, with a base that splits into two 8.5L pots with one AQUAvalve water dispensing system. Thus, at a lower cost, we can grow more plants that do not require such large pots.


The set includes:

1 x double stand
2 x 8,5 l pot
1 x AQUAvalve dosing system
2 x copper mat to control excessive root growth
2 x fabric mat to prevent the substrate from escaping from the pot
1 x T-connector
1 x 1.5m of 6mm hose
1 x instruction manual


AutoPot system is a universal irrigation system suitable for growing most edible and ornamental plants. It can be used in greenhouses, gardens or at home, regardless of the level of experience. It can be grown both in typically hydroponic media, having the advantages of soilless cultivation, as well as in soil, coconut or rockwool. Operating automatically, the system allows you to save a lot of time, go away for a long weekend and be sure, healthy plants, at the same time successful harvest, without the risk of drying out.


Why AUTOPOT system?

• No more
• daily watering,
• The system can be left unattended, until the nutrient solution from the reservoir
• is
• exhausted (depending on the size and type of the system and the plants grown, up to 2 weeks)
• No power supply, pumps, timers or special sewer connections, gravity pressure is the strength of this system, Saving
• water and fertilizers, the system is closed, all the water is used by the plants,
• No need to constantly monitor pH/EC
• Easy, intuitive operation, Low
• maintenance costs,
• No limits on the size of the system,
• Free spacing of pots,
• No need to rinse each plant at the end of flowering, just pour clean water into the tank,
• AutPot system makes growing simple, automatic ideal for busy hobbyists as well as people growing commercially.

After connecting the pots to the reservoir, filling it with water and the appropriate plant food, the system waters the plants according to their needs, thanks to the AQUAvalve dispenser. The AutoPot system is a bestseller in the UK hydroponics market.

The AQUAvalve water dispensing system, is responsible for supplying water, blocking the supply, so that the roots can use the water poured into the saucer, dry out, oxygenate at the same time, after which the saucer is filled again to the 20mm level. Read more about how the AQUAvalve system works here.

All you need to remember is to refill the main tank with the appropriate plant nutrient solution.

The manufacturer recommends the use of 6mm diameter nutrient solution supply hoses for systems of 1-11 pots. Above 12 pots, a 16mm hose is recommended. The more pots in a given set, the larger the main tank should be.

The reservoir should be placed at least 15cm above the pots so that gravity pressure will effectively irrigate the system.
Recommended substrates are soil/coconut/mineral wool in a 50%/50% ratio with perlite/keramzite.

• Pot capacity 8.5l
• Dimensions: 24.5cm x 24.5cm x 20cm h
• Dimensions of the base with the AQUAvalve system:
• 37.5cm x 57.5cm
• Tank not included