Airontek Electronic Ballast 250W-660W, dimmable

New electronic ballast Airontek 600w dimmable + super lumen boost

Why choose an electronic ballast?

Electronic ballasts are more efficient and quieter than traditional electromagnetic ballasts.
They also emit less heat and are much less traumatic in lighting HPS bulbs, with the result of extending their useful life.

While a traditional ballast requires a starting point of 680 / 700Watts to light a 600 Watts HPS bulb, with an electronic ballast 600/620 Watts are sufficient.

Furthermore, traditional ballasts, when they turn on the bulb, are already at full power and these repeated electric shocks considerably reduce their lifespan and PAR output.

The electronic ballasts turn on by sending a low level of power to the bulb and slowly increase it. In a few minutes they make the bulb reach full power without trauma.
This procedure is called SOFT STARTING and serves to minimize damage to the bulb by extending its "PAR life", ie the period in which the ratio between consumption and PAR emission is at its maximum efficiency.

After one year of use, the PAR emission coming from an electronic ballast is reduced by 20-25% while on a traditional ballast it will have undergone a decay of about 50-60%.

The flickering (very fast fluctuation of the light emission) sometimes noticeable even with the naked eye, which occurs with the traditional ballast is absolutely absent with the electronic, and this also translates into greater efficiency.

Advantages:

LOWER ELECTRIC CONSUMPTION
GREATER LIGHT EMISSION
LOWER HEAT EMISSION
ZERO FLICKERING
BULB LIFE EXTENSION (AT FULL PAR EMISSION)
SHORTEST WARM UP AND RE-IGNITION TIMES
LESS ENVIRONMENTAL POLLUTION

Features:

Voltage (V): 230
Frequency (Hz): 50/60
Harmonic Distortion: <10%
Ambient temp. (C °): from -25 to 50
Protection: IP23
Certification: CE and ISO 9001: 200