BlUMAT Dripper with humidity sensor

Dripper with humidity sensor

 humidity sensor, valve and dripping distributor, i.e. a typical Tropf-Blumat dripper. 
As standard, it is equipped with a drip tube and an 8-3-8 fitting. It is longer than the standard 
dripper, it is 23 cm long, we recommend using it in large pots above 30 cm high and for irrigating 
individual shrubs, perennials with a height of about 1.5 meters planted at a similar depth.
Elements necessary for connection to the water supply, if the dripper is not purchased to expand 
one of the ready-made kits that already contain the listed elements

8mm water inlet hose, black or white, sold by the meter or in rolls (the product can be found in the 
Other Accessories section), which is needed to connect the dripper to the water supply. When the 
installation takes place against a white wall and we do not want it to be visible, we recommend a 
white hose;

Coupling for a gravity tank (product in the Other Accessories section), enables the connection of an 
8 mm pipe with the tank;

End connector, for closing the 8mm water supply pipe (product in the Other Accessories section);

A pressure reducer (the product can be found in the Other Accessories section), which is needed when 
the system is to be connected to the tap.