The basic set of drip irrigation created for irrigation of plants in the open air (balconies, terraces, beds) or in greenhouses. Total length of irrigation surface up to 3m. The set can be expanded. Simple installation principle: 4 Tropf-Blumat drip heads (4 irrigation positions) are required for 1m cultivation length, 3 Tropf-Blumat dripers for 0.8m and 1 for pot / crop sizes up to 25cm in diameter.

Automatic irrigation system, Tropf Blumat perfectly irrigates plants outside or in greenhouses or gardens. The dripper with a sensor via a ceramic cone probes the soil moisture level and adjusts the hydration range to the requirements of plants regardless of their number or size. Connected to the gravity tank or to the tap via a pressure reducer. Automatically adapts to changes in temperature, wind or sunshine. Perfect for hanging flower pots, large plant containers, flower beds, balconies and greenhouses.

Each ceramic cone works simultaneously as a sensor and dripper! Thanks to this, it is an unrivaled solution for all types of plants. The Tropf-Blumat irrigation system does not need electric power or programming. Each Tropf-Blumat dripper reacts by itself, according to soil moisture, automatically distributing the amount of water that is needed at the moment. The distribution of water is slow, so the plants reach almost at the temperature of stagnant water. This guarantees a great flowering and healthy growth of the plant. Tropf-Blumat can be modified and expanded up to 500 dripers. 
Automatically watering individual plants only when they need it
Connected to a gravity tank or to a tap if you use a pressure reducer (optional) 
Easy to install using ordinary scissors 
Relatively inexpensive and works over the years 
Ideal for small and large crops 
Quiet - it works silently! 
It does not need programming and control

SPECIFICATION

Contents of the package:

12 Tropf-Blumat drip heads 
7m water supply hose in black 
1 elbow connector 
1 end 
fitting 
1 branching fitting 
1 T- coupling 
1 hose coupling 1 coupling for raised tank

Elements recommended for expansion:

Water hose 8mm, 10 m black (the product can be found in the ACCESSORIES section), which is needed when the distance from the tap or tank to the plants is longer than 7 meters or white hose (the product can be found in the ACCESSORIES section) when the installation runs on the background white wall and we do not want to be visible 
Pressure reducer (the product can be found in the ACCESSORIES section), which is needed when the system is to be connected to the tap

NOTE:

We do not recommend replacing the original black or white hose with a transparent hose. Water supply hose must not be permeable to light as algae may begin to develop in it. All snakes offered by Blumat are impervious to light.