SuperPro CRL-1 Combination Recycling & Lighting Timer

The SUPERPRO CRL-1 Combination Recycling and Lighting Timer offers horticulturists some of the most essential safety features available to control supplemental lighting and hydroponic pumps.

SUPERPRO CRL-1 Features

1. Features a 24-hour digital clock capable of turning lighting ON and OFF at the user's specified times.

2. When using supplemental HID or CFL or LED lighting, it is vital to ensure the grow lights do not raise growing temperatures beyond a safe level. The "high-temperature shutdown" feature uses an external temperature sensor connected to the CRL-1 to turn off the light fixtures if an unsafe temperature is detected.

3. Monitors the incoming power and makes sure the lighting fixtures will not attempt to re-strike lamps until they are correctly cooled down after a power failure.

4. The Superpro CRL-1 features a "recycling timer" function that controls any device working on a repeating schedule. The "recycling timer" is programmable to work during the day, night, or 24-hours. The timing feature is versatile, accurate, and can be adjusted from 1 second to 96 hours.

Superpro CRL-1 FAQ

Can the recycling timer be activated 24 hours a day?

Yes, there are three (3) modes to select from. “24 Hours” which allows the timer to run 24 hrs a day. “Day” which allows the recycling device to run only during day time. And “Night” allows the recycling device to run only during night time

Does the recycle timer continue to work without power?

The user can choose to allow the recycle timer to continue to count down, or to pause during a power failure. (See recycle Timer Mode)

What if the timeclock is not keeping correct time?

The battery may need to be replaced. The lithium battery has an average life of 5 years. Battery required is a lithium CR1220 3 volt.

What if there is no power?

Reset the power switch (circuit breaker). If this continues reduce the number of devices connected .

How do I know what function or setting is activated?

Some settings are identified by a green LED light will flash next to the function(s) that is currently activated.

How many lights can I connect to the timer?

The timer is designed to control supplemental lighting up to 1200 watts combined. A power splitter may be used to control more than one light. An additional lighting controller is recommended if multiple high wattage lights are to be controlled.