Programmer TimerBox 12x600W + Heating SD21-416EU
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 12x600W loads. Model with heating socket is on when lights are off (power management).
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 12x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
3 Pole incl. connector 16A (EU) 4x600W
3 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power reserve 30min. setting
Relays: 4x16A 230V
Protection class: IP40
Comments (0)
No customer reviews for the moment.
83 other products in the same category:
- Temporarily unavailable
- Temporarily unavailable
- Temporarily unavailable
- Temporarily unavailable
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 12x600W loads. Model with heating socket is on when lights are off (power management).
arrow_upward