BLUEGUARDIAN MONITOR CONNECT - electronic pH and EC monitor with Wi-Fi

Bluelab Guardian Monitor Connect with Wi-Fi !!!

The Guardian Monitor Bluelab Connect is an absolute revelation, providing 24-hour continuous readings for pH, (EC / ppm 700 / TDS / CF) and temperature in the nutrient solution. Optimizing these critical parameters helps ensure successful yields.

With built-in Wi-Fi - you can monitor data and have all pH, EC and temperature readings always at your fingertips. Recorded data and parameters that, thanks to the wireless connection, are transferred to your computer or other mobile government (e.g. tablet, smartphone) It doesn't stop there. You can access the data via the cloud from a remote mobile device or computer to check, extreme fluctuations and parameters.

Just one Bluelab Connect Stick (to be purchased separately) is enough to receive data wirelessly from one or more Connect Guardian Monitors. For remote access on a computer or in the cloud, you need constant Internet access.

The monitor is designed for indoor use, and can be wall-mounted or hung from a support bar. Configure the tank place the pH and EC electrodes in the solution, then turn on the device! Just set the high and low alarm states - if the solution moves away from the ideal range, it flashes on the display. A quick glance at the monitor will let you know when the solution needs adjusting. Purpose: aquariums, plant cultivation, greenhouses, hydroponics, industry. Instructions for using the monitor and instructions for wireless connection can be found under the videos in the DOWNLOAD tab !

There is a 2-year warranty on the device, and a 6-month warranty on the pH electrode.

Features of the monitor:

• Data logging capability with ONE Bluelab Connect Stick required- sold separately !!!
• Bluelab Free Connect software available for free on the internet
• View data and current status remotely via Google Docs (constant internet access required)
• Green LEDs to indicate plant safety
• Large easy to read display
• No EC or temperature calibration required
• Simple push of a button
• pH calibration
• Selection values for EC and temperature
• Flashing high and low alarms
• Greater resistance to RF interference
• Waterproof design
• Power supply with international adapters
• included
• Replaceable pH electrode included
• Adjustable display brightness Memory backup (settings retained,
• when power lost)
• Compatible with Bluelab Connect Stick and Bluelab Connect Range Extender
• For signal amplification, we recommend the Bluelad Range Extender which is available in our store.
• Comes with two pH electrode calibration sachets (pH-4.0 and pH-7.0)

Operating environment: 0-50°C

Power source: Input: 100-240 VAC, 50-60 Hz, 5 VA, 4 interchangeable plug types (USA, euro, UK, NZ / AUS) Output: 5V 1A

Signal strength: Indoors : 20 meters. Outside: 50 meters

Bandwidth: 2.4 GHz ISM

System requirements: Microsoft Windows XP or later for Bluelab Connect Software, Internet connection for remote access and measurements assisted to the cloud